Here there! Welcome to my blog post on how to get a broken headphone jack out of ps4 controller. A broken headphone jack on your PS4 controller can be a frustrating thing to deal with. When the headphone jack gets damaged or stuck it can prevent you from using your favourite headphones to chat with friends during gaming sessions. This issue can arise due to damage or rough handling of the controller over time.
You should resolve this problem immediately to get your PS4 controller fully operational again. A defective headphone jack may limit your in-game audio cues, interact with friends during the game, or even prevent you from using some games’ audio-dependent features.
In this article, we will teach you the correct and safe way to unplug the broken headphone jack from the PS4 controller. We are going to cover the tools and materials you will need, measures to take to avoid any further damage, and step-by-step directions for each step of the repair process. By following our guide you will be able to repair your PS4 controller and once again enjoy your gaming fully.
Tools and Materials Needed to Fix the Broken Headphone Jack in the PS4 Controller
To fix the broken headphone jack in your PS4 controller, you must have some essential tools.
- These contain a small screwdriver which is used for opening the control box in addition to that you will need tweezers for handling small parts and a couple of cotton swabs for cleaning. Similarly, more additional supplies can also be found for this fix.
- The rubbing alcohol can clean the area around the broken jack which might have dirt or debris causing the problem.
- Adhesive remover too could be of use if the broken jack cannot be pulled out and it stuck in place. These materials will make the repair process easier and better.
Precautions and Safety Measures
You have to take out your PS4 controller from any power source as the first thing to do when fixing it. This protects you from any electrical injuries and your controller from any damage as well. Be sure not to exert excessive force when working on your controller.
Too much force will cause more damage, deepening the situation. Rather than that, treat the parts and components gently to prevent any hurt.
Here are some tips to help you avoid making things worse while fixing your controller:
- Take your time and do it step by step so as not to rush and make mistakes.
- Look at the way things are put together so it is easy for you to put them together later.
- Try to remember any screws or little parts you remove because you don’t want to lose them.
- If you are not sure about something don’t hesitate to ask for help or look up for advice online.
- And what’s most important, be patient and don’t get mad if not everything works out as planned. The controller can be taken care of with some bit of care and attention, everything will go smoothly.
Step-by-Step Instructions: How to Get Broken Headphone Jack Out of PS4 Controller
Now, we will go through fixing the malfunctioning headphone jack of the PS4 controller by following these steps carefully:
Step 1:Disassembling the PS4 Controller
- Begin with the screws on the back of the PS4 pad. Typically these screws are underneath small stickers or plastic covers.
- Take a small screwdriver and with care withdraw those screws. Keep it in a secure place then you’ll need it later.
- Remove all the screws first and then separate the two halves of the case of the controller gently. Take care as you may have delicate cables connecting the two halves.
Step 2: Locating the broken headphone jack After opening your PS4 controller, it’s time to find the broken headphone jack. Look closely at the interior of the controller to locate the jack. Check around the area where the headphone jack is supposed to be.
Sometimes, the broken piece might be installed deep inside the controller. Take your time to examine it thoroughly. Understanding where the problem lies will help you proceed with the repair process effectively. Once you’ve found the broken jack, you can move on to removing it carefully.
Step 3: Removing the broken jack
- Prepare: You need to get prepared, with the tweezers or pliers being small.
- Grip: Employ the tweezers or pliers to gently grasp the busted headphone jack.
- Extract: Pull the dead jack out of the control. Please, don’t apply too much force.
- Check: Inspect after the jack removal that there are no pieces left behind.
- Clean: Wipe the jack area with a cotton swab dipped in the rubbing alcohol to remove any dirt or residue.
- Verify: Ensure that the removed jack is completely taken out before moving to the next stage.
Step 4: Cleaning the area
Once you have taken out the damaged headphone jack from your PS4 controller, it’s very important to clean up the surround since this can be crucial for its right functioning.
- Gather Materials: Make a cotton swab ready and have rubbing alcohol for cleaning.
- Apply Alcohol: Dip the cotton swab into the rubbing alcohol ensuring it not dripping.
- Clean Surrounding Area: Swab around the area where the jack broke, to be very careful. Pay heed to any dirt, debris, or adhesive residue that may have been collected.
- Apply gentle moves so that there is no damage to the brittle parts inside the controller.
- Repeat if Necessary: In case the spot is heavily dirty/sticky, you may have to repeat the cleaning procedure with another clean and moist cotton swab soaked in rubbing alcohol.
- Allow to Dry: After you thoroughly clean the area, let it air dry completely before reassembling the controller
- Cleaning the surroundings of the faulty headphone jack makes sure no blockages or dirt would affect the performance of the new jack.
Step 5: Reassembling the controller
Putting the controller halves back together:
- Align the two halves of the controller casing carefully, ensuring that all buttons and components fit into their respective slots.
- Gently press the halves together, applying even pressure along the edges to ensure a snug fit.
- Listen for any clicking sounds, which indicate that the halves have properly snapped back into place.
Reinserting screws and ensuring everything is secured properly:
- Retrieve the screws that were removed earlier and place them back into their respective holes on the back of the controller.
- Use a small screwdriver to tighten each screw, but be careful not to overtighten as this could strip the threads or damage the casing.
- Double-check that all screws are securely fastened and that there are no gaps or loose parts in the controller casing.
Testing and Troubleshooting: To Get Broken Headphone Jack Out of PS4 Controller
A.Checking if the headphone jack is completely removed:
- Inspect the area where the headphone jack was located to ensure there are no remaining fragments or debris.
- Use a flashlight if necessary to illuminate the area and check for any hidden pieces.
- Run your finger along the edges to feel for any protrusions or rough spots that could indicate leftover fragments.
B. Testing the controller to ensure it still functions properly:
- Connect the controller to your PS4 console with a USB cable and then turn on the console.
- Test all the buttons, joystick, and triggers to make sure their responses are correct.
- Insert headphones or earphones into the headphone jack and verify for audio output.
- Verify that the controller’s vibration function is working as expected.
- Play a game or navigate the PS4 menu to confirm that all functions are working properly.
C. Troubleshooting common issues (e.g., audio not working):
- If you’re not getting any audio output from the headphones, double-check the connection and make sure the headphones are properly plugged in.
- Adjust the volume settings on both the controller and the PS4 console to ensure they’re not muted or set too low.
- If you’re still experiencing audio issues, try using a different pair of headphones to rule out any problems with the headphones themselves.
If none of these steps resolve the issue, you may need to revisit the previous steps to ensure the headphone jack was removed and installed correctly. If necessary, seek further assistance or consider contacting Sony for support.
In summary, this blog post has presented a step-by-step guide to repairing the broken headphone jack of the PS4 controller. We embarked by carefully taking apart the controller and went around identifying and removing the broken headphone jack.
We reassembled the controller and tested it. Everything worked fine, and we made sure to clean up the area. If you need any more information on this issue, you are welcome to contact us.
Ensure you handle your controller with care, take good care of and maintain it periodically to avoid future problems.
You also like: How to Remove a Broken Headphone Jack
Welcome to Blushaudio! I’m Bushra, your audio enthusiast and guide. With a deep passion for audio, I provide honest reviews and quick fixes for common audio device problems. My goal is to simplify your audio device selection and enhance your listening experience. Join me on this audio journey, and together, we’ll explore the world of audio with clarity and ease.